Forum: Hardware

SubjectRepliesLast Post
Connectors Name???1
micro2440 with no board10
display cable length0
Change Mic Input to Line In4
Energy Saving3
DPI for Toppoly 3.5" LCD3
Parallel JTAG Adapter Schematic0
1024x768 LCD0
Static Charge Reset/Freeze Problem7
AIN max voltaje Input4
backlight not working on 7" lcd3
openocd config for O-Link0
Maximum Ratings VBacklight Input0
Static Charge Restart Problem0
serial port issue0
Mini2440+RGB output0
JTAG-SJF2440.exe not supporting micro24405
Resolution display 8 inch2
lcd2vga power requirements1
TP-Link WN321G Didn't Work2
usb not detect1
Connect Mini2440 to LCD 19"3
Com ports5
LEDs in the RJ45 ethernet connector3
CE EMC certificate & operating temp.3
Serial on CON4 connector?1
System Bus uses1
Wifi adapter4
mini2440 serial port (COM1) error7
Power consumption without LCD1
VGA controller3
Carrier board...0
serial port pinout1
GPIO Pin 14 (EINT5/GPF5) Issue1
Case for mini244027
create Bus for 1040 microcontroller9
Micro2440 - Where does JTAG connector connect to?4
H-Jtag - not detecting hardware9
6v source + 250 mA / 3.3V drain3
Memory mapped IO0
Power consumption Micro24401
JTAG pinout on mini24409
Cables3
Problems with 7'' Display9
mini2440 with 256MB NAND memory corruption8
N35 LCD Problem6
Modifying Micro2440 audio4
Ribbon cable to connect GPIO's5
DRAM size10
GPIO Pullup Enable5
<< 11 >>