Forum: Linux

SubjectRepliesLast Post
console login4
Change network parameters from app2
How to enable AIN1-AIN4 on mini6410?5
libusb compiling3
How to detect USB device in friendly ARM3
change login message1
Configuring UART for gps module1
menuconfig1
hello world cross compile3
linux installation time in mini64100
Character device driver newbie question2
qt 4.7.4 and mini64100
Understanding the LED driver0
Mini6410 and 7'' Display3
mini24404
How to find I/O address of UART in mini24401
Rtserial and Rtnet for mini24400
Run Test Progrm on Friendly ARM6
Change language from Chinese to English1
How to configure Linux to only boot in my program0
can not write rootfs by DNW0
LEDs , buttons, IOs, help me4
Konqueror not showing mjpeg streaming0
Could not connect to localhost2
mjpg-streamer on mini2440, using embedded camera0
How can I connect serial port with CGI?1
[ask] application for mini24401
Adding SMDK2450 board to the kernel1
Lua for mini24401
Boot freezes after Xenomai or Real Time Patch5
502 Bad Gateway3
QT-Serial port7
segmenntation fault 'system()' GPIO access2
Unable to mount USB drive4
start logo change8
Hello module is not shown in Menuconfig0
where is fstab?2
supervivi2
control LED(GPB5~8) mini24402
after cross compile5
Tiny6410 Toolchain0
how to control I/O port mini24404
s3c2440 camera controller0
Need help in serial port interfacing10
issues with t35 screen and xserver2
SQLite - database disk is malformed0
Launching applications, which need XServer5
Not able to load kernel3
run ts_calibrate only when not calibrated3
parity bit0
<< 34 >>