All Forums

SubjectRepliesLast Post
rmmod module4
how to enable GPIOJ0
Error reading from /dev/dsp2
eth0: link down0
non-os application in nand, 2nd level bootloader etc0
Power consumption without LCD1
!OEMVERIFYMEMORY: Invalid image10
Slow Refresh1
GPIO (USERKEY)2
Problem with boot by nand1
VGA controller3
DNW write error4
mini2440 how to use the library in the image0
Carrier board...0
serial port pinout1
Supervivi-128M6
GPIO Pin 14 (EINT5/GPF5) Issue1
WLAN configration0
help with java7
Wireless Adapter0
C Libraries & Compilers0
Howto UIC a UI-File created with the Qt2-Designer13
Anyone has tried DFBARGS=no-hardware ?0
Cross compiling qt2.2.00
evc++ debugging error(CEMON>EXE)0
Case for mini244027
directdraw3
mini2440 work in image processing?0
create Bus for 1040 microcontroller9
Micro2440 - Where does JTAG connector connect to?4
any other open Source OS other than OS0
disable tasbar4
H-Jtag - not detecting hardware9
Konqueror - Stock Linux install3
QT 4.6.2 with analog to digital5
Qt 4.6.2 installation procedure (Windows CE 5.0)0
gettime function in vc++5
Read serial port by C on mini24400
Kernel panic - not syncing: Attempted to kill ini4
Add fonts to FriendlyARM4
yaffs problem while mounting Android mtd-partition0
PrinterCE.NetCF SDK1
Question: Compiling Linux kernel sources for 128MB NAND4
6v source + 250 mA / 3.3V drain3
u-boot error in building2
screen rotation driver support?2
arm programs2
Qt 2.2.0 build problem6
mjpg-streamer web page authentication14
endianness of preloaded bootloader/Linux?1
<< 105 >>