M1larepa 
Hello, I tryed to boot debian, android and kitkat using funsing.sh. usb flash is prepared OK, but while booting on both 3 images, uImage is not found. Mounting those usb flash drives on linux show all partitins OK, uImage and uImage.hdmi arer there. Any idea ? -------------------------------------------------------------------------------- Second Boot by Nexell Co. : Ver0.6.2 - Built on Jun 27 2016 17:41:43 -------------------------------------------------------------------------------- EMA VALUE : 001 123 Lock value = 154 GATE CYC = 0x00008421 GATE CODE = 0x3E3C3A3E Loading from sdmmc... Image Loading Done! Launch to 0x42C00000 U-Boot 2014.07-g3493520 (Jun 25 2016 - 18:22:58) PLL : [0] = 550000000, [1] = 800000000, [2] = 800000000, [3] = 614399000 PLL1: CPU FCLK = 800000000, HCLK = 200000000 PLL2: BUS BCLK = 400000000, PCLK = 200000000 PLL2: MEM MCLK = 800000000, DCLK = 800000000, BCLK = 400000000, PCLK = 200000000 PLL0: G3D BCLK = 550000000 PLL2: MPG BCLK = 400000000, PCLK = 200000000 I2C: ready DRAM: 256 MiB Heap = 0x43000000~0x45000000 Code = 0x42c00000~0x42c73984 GLD = 0x42bffeb8 GLBD = 0x42bffe68 SP = 0x42bffe68,0x42bffe50(CURR) PC = 0x42c06114 TAGS = 0x40000100 PAGE = 0x42c80000~0x42c8c000 MACH = [4330] VER = 1 BOARD= [NanoPi 2 Fire] LCD = X710 MMC: NXP DWMMC: 0, NXP DWMMC: 1, NXP DWMMC: 2 In: serial Out: serial Err: serial switch to partitions #0, OK mmc0 is current device RGB: display.0 DISP: W=1024, H= 600, Bpp=32 ** File not found logo.bmp ** can't find bmp at 0x47000000 (type:0xffff), fb:0x46000000... LOGO: DRAW FB=0x46000000, X=1024, Y= 600, Bpp=32 Hit any key to stop autoboot: 0 ** File not found uImage ** ** File not found root.img.gz ** Wrong Image Format for bootm command ERROR: can't get kernel image! s5p4418#