newbie 
Hi all,
I want to set up KGDB, plz help me!!!
Connection between my target board and host machine is through UART/Null
Modem with the help of USB-SERIAL Converter and the same is used for
console output @ host machine.
So if when i do the following
(gdb) set remotebaud 115200
(gdb) target remote /dev/ttyUSB0
Here /dev/ttyUSB0 is my system terminal where I have connected
my target board.
my console is gettin disconnected.
Can any plz correct me. and guide me on the same
Thanking you.