Tiny6410 GPIO and Ports

It looks like there are two different configuration for the Tiny6410 board.
1 - http://www.friendlyarm.net/sites/products/tiny6410-sdk-2.jpg (Not the
SDK board, just the Tiny6410)
2 - http://www.friendlyarm.net/sites/products/tiny6410_1.jpg

1 don't have the CON1 and CON2 ports that 2 have.

According to Minidevs (http://www.minidevs.com/Tiny6410.html) info on the
Tiny6410, the CON1 and CON2 have the GPIO ports of the Tiny6410.

I need to verify if the pin identification here on FriendlyARM.net
(http://www.friendlyarm.net/dl.php?file=tiny6410_schematic.zip) refers to
the board 1, or if it refers to the board 2. The schematic don't identify
CON1 and CON2 ports, so I'm inclined to believe that it really refers to 1.
But getting word from someone who have already developed for it, and used
the GPIO from board 1 would be great.

I'm new to developing on this board, and some solid ground and info would
be better than just guessing.

Notice: it is a new version Tiny6410 CPU board. Make sure the board you
have is the new version.
Yes, The CON1 and CON2 was on the cpu board, 

For CON1: GPIO,AD, SPI0,TAVOUT1
For CON2: CMOS,GPIO

More Pin details you can see the follow link:
http://www.minidevs.com/Tiny6410/Hardwarecpu.html