About Wince 6.0 Platform Build

Hi Everyone,

I have Mini2440 board. I installed Wince 6 platform. And, i build a
platform with visual studio 2005. Successfully, i loaded nk.bin and boot
file into board. It works with these settings (hive and register, ram and
rom only) in NOR.
But, my main problem is that Board doesnt boot when I restart board and
switch NOR -> NAND.
I want to be Board works on NAND. And, when i restartd board, it will work
on NAND.

Additionally, Are there anyone who build Wince 6.0 on Nand?

Thanks.

Update your SuperVivi to the latest version. There was a problem with
earlier versions where it would boot CE after flashing, but would not boot
after reset.

Alright, How can i do? I want to build wince 6.0 in vs2005. So, it will
boot after reset. Please.

Thanks.

You always load the WinCE image to the NAND flash...NOR is too small (2MB)
To update SuperVivi have a look here:
http://www.friendlyarm.net/dl.php?file=download.pdf -> Bootloader download
to NOR